Step 9:

In preparation for laying the glass ive identified and removed any high points then gave it a rough sanding, I didn't go mad because the different angles my chisel left reflect the light nicely I then put a thin, bead of clear silicone all the way round the wood, drop the glass down and put another bead on top, tidy up the sealant and spread some weight evenly on the glass (I used a couple of large speakers) and let it cure, if I ever need to lift the glass i can just run a stanley knife through it. the clear silicone also absorbs some light giving it a green glow around the glass.
nice job... i have a similar peice of glass that i am looking to use....

About This Instructable




More by Teddy Westside:Distressed desk & Indoor herb garden 
Add instructable to: