Print PDF
Favorite
Email
Step 3Wiring for led strands.
continuing from the last step, we now stick the leds to the wood. i used hot glue. which is really handy since it hardens quickly. i used hot glue to stop the leds moving and then painted the thing with PVA glue (dont apply too much PVA, its runny and will stick the leds to the wood, u want the leds movable/adjustable, so give it about 5-10mm of spacing.
the wiring is pretty simple, if u are knowlageable in eletronics. this will be simple as. but for the beginners, i have included a pic demostrating the wiriing.
leave about 10-15cm of wire hanging out of the wood(only one end of each side). this will make easier installation for future steps.
the wiring is pretty simple, if u are knowlageable in eletronics. this will be simple as. but for the beginners, i have included a pic demostrating the wiriing.
leave about 10-15cm of wire hanging out of the wood(only one end of each side). this will make easier installation for future steps.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
