diy cheap asian style car underbody lights

Step 4 Capactiors

while letting the pva glue aside to dry. time to make ur lights fade-able.

ive already had this made before. so only got a picture of the capacitors.

-ve marked on the picture is where there is a black band going from the top to the bottom of the capactor with the "-" symbol.

connect however many u want in parallel with eachother. make sure it does not short then encase or insulate the capactior bundle as shown in pic2

Comments

[zerozz]

What size capacitors? The ones shown are 10 volt instead of 16 volt. You mention you have 19800uF but is this the total of all the capacitors or the value of just one capacitor? Can I use just one large capacitor or is there a need in connecting several together in parallel?

[zerox61]

actually, the 10v ones shown in the pictures was just for demostration purposes. i used 16v. it wont matter what size capacitors you use. you can use a big one instead of lots of small ones. and its the total value which is 19800uf.

[alexharned]

So does the +ve for the capacitors pigtail go between the battery and the Leda and the negative to the negative on the battery? How does this hook up?