Introduction: Drumstick Grips That Stick to Your Stand
this instructable covers 2 things.....sticks slipping out of your hands and never having extra close to you for when thay brake.
P.S. i woud not recomend puting these on the shell
P.S.S. sorry some of the pictures are blurry.....still trying to figure out a new camra
Step 1: Things Youl Need...
okay i forgot to take a picture of this so thats why Jason Varitek comes on your screen.
2 colors of electric tape (or one it doesnt really matter)
sticky back velcro
hands (evan if its somone elses)
Step 2: Rapping the Sticks
start at the botom of the sticks and rap up. you only need to go up less than haf way. do this on the other stick.
Step 3: Second Layer
just do that. go over it a second time. or third. or forth. just as many as you need.
Step 4: Cutting the Velcro
cut 4 little rectangely things. 2 of each kind.try to keep them the same size.
Step 5: Adding Velcro (to the Stick)
put the strips just on top of the grip.put the fuzzy side on one stick and the non fuzzy side on the other.
Step 6: Adding Velcro (to the Stand)
put the strips so that the sticks stick to the stand WITHOUT touching the simbal. now you have stick grips that stick to you and the stand!
Step 7: Step 7
there is no step 7.......but is a cool picture of a squirrell...