loading

A way that you can carry your water bottle with ease !!!

Step 1: Materials

1. Scissors

2. Duck Tape

3. Water bottle

Step 2: Directions

Take the duck tape and measure it so its bigger than the water bottle. Then put the duck tape together inside out .

Step 3:

The put the same sized piece of duck tape on it so its not sticky on any sides.

Step 4:

Drape pieces of duck tape over the bottom of the circle you made, so there are no holes but on the top.

Step 5:

Now put duck tape in the inside so it not sticky.

Step 6:

Repeat steps 1 & 2 but put it on top of the first part.

Step 8:

Then repeat step six how ever times you need.

Step 9:

I made it this big, but you can make it as big as you need because maybe you have a taller water bottle.

Step 10:

Then, for the strap, take a big and long piece of duck tape and stick one side to the top like i have in the picture. then take a piece that is the same size and stick it onto the other one.

Step 11:

Then make the other side of the strap (if you want to and it doesn`t matter how big ) and the same thing as step 10 but stick the sides together.

Step 12:

Then take piece of duck tape and put a piece of duck tape in the middle of the other and put it on the holder to make a pocket and do the same with an other piece .

Step 13:

Then close the pocket with other pieces of duck tape . Then your done !!! I hope you had fun and you enjoy it !!!

<p>I love the Idea I did it and is was sofun!!!!!!!!!!!!!!!</p>
<p>Thank You !!!!!! :p</p>
<p>Very handy! Great idea!</p>

About This Instructable

566views

3favorites

More by bluejean789:How to draw a hummingbird duck tape water bottle and phone holder 
Add instructable to: