easy 10 minute airgun

easy and works well for how long it takes

(check new step (# 6) )

Step 1: Materials

you will need:

2 liter bottle
bike pump (with needle)
cork
two 7/8" PVC valves
one 7/8" PVC "T"
one piece of 7/8" PVC 1/2" long
two pieces of 1/2" PVC 1 1/2" long
two pieces of 1/2" PVC 2 1/2" long
one piece of 1/2" PVC at least 2 feet

Comments

[prabhjot999]

how much did it cost to make

[yamiyobi]

where can you at the valve

[aljh]

uhh where would i find a cork??? that size even?

[li789]

could you use a half liter bottle

[stephenniall]

Hmm im gonna make a variation on this Out of scrap pieces i have

[yamiyobi]

thats very cool good idea with the cork

[fireFEIND67]

u gotta make a true trigger system dude!!!!

[milamber]

a trigger nozle for a hose works as a great trigger I just made my first air rifle and thats what I used

[flaresam]

me 2, it works great!

[game_freak222]

This Better Work

[gogeta126]

cool :)

[gogeta126]

hey whats the power of this thing in FPS ??????

[seymourpatrick]

I think these measurments are wrong. its impossible to fit the 1/2 inch into the 7/8* without an expander. Help?

*i used a 3/4 because 7/8 doesn't exist

[Bugman9]

how do you put the bottle on? do you put pvc cement on? i even put the bottle all the way on and it leaks air.

[Bugman9]

the video on the intro doesn,t work. can you make it availiable to watch it ?

[Bugman9]

should be easy to use because you don't have to plug it in and out repeatedly.

[Bugman9]

how big is the cork?

[Bugman9]

i was told that there os no such thing as a 7/8" pvc. where did you get it?

[kburesh]

Where is the cork again, and how do i unplug the cork?

[shooter1]

Mate you done a great job of this one i am only 11 and trying to make something like this and put it on this website.

[kicker109]

it is probably not smart to put your age on this site dude.

[guitar2damax]

yea anyways

[shooter1]

Im making this.

[kicker109]

so

[kirkdarida]

can u makea vid on how to load it because i dont know how

[kicker109]

you put the ammo in the barrel then shoot

[blugyblug]

Im gonna make something like this, except safer 0o...About step 6. Wat is attached to the cannon? It looks like a syringe ...and how are u supposed to pump with it? You have to take it off, Get some are in, put it back in and push the air out...then u have to repeat..

[biolethal]

Its a pump... something like a bicicle pump.

[hacker22]

nice!

[eshimo]

the valves are about 2 bucks each at ace hardware, the T was $1, and all the reg. PVC is 55 cents a foot

[pandaboy292]

i got a t for 45cents at lowe`s.

[-insertnamehere-]

cool, it looks like this might be able to make this with my low budget! BTW I like the pump attached as a handle :)

[justinle13]

can u tell me how u make the shells?

[eshimo]

ya its pretty cool i figured out how to make shotgun shells for it. they can shoot up to 10 6mm bbs

[-insertnamehere-]

I want to make your gun, because my current one is not very portable at all....but it can shoot 200 6mm airsoft bbs at once :). Also, it takes about 150 pumps to pump it up :( the tank is 4" PVC and is 4 feet long. I have two interchangeable barrels, one made with 1.5" and the other with 2", each five feet long. reaallllly heavy :P

[kicker109]

so its like a shotgun, huh

[eshimo]

this is my pyro potato cannon i use hairspry for fuel

[-insertnamehere-]

cool...I haven't made one of those kind of cannons yet, because I don't feel like buying hairspray :)

[guitar2damax]

haha yea that seems pretty cool even though you could blow yourself up haha!

[eshimo]

instead of pneumatic try using flammble aerosol in the barrel with n igniter thats one o mine