With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
do you love m&ms and Lego? then this is the instructable for you
first your going to need a bottom piece at least 10 by 8 and put on a double slope and next to it put on a single slope 2 from either sides
then you have to make a piece that is 3 by 4 2 layers high and covered in flats. then put it next to the slopes so that it is flush with the back.
then you need to make a piece like this that has a 2 by 2 hole in it so the outer border is 4 by 4 and put flats all around the sides except 2 middle ...
then put bricks all around the outside to make walls but have a gap where the m&ms come out of. dont forget to put the square flat where it shows you ...
put the next layer of bricks on that will cover the mechanism which is the 4 by 4 with hole in it with the 6 by 2. to put that in it have the square i...
make a piece that is a 2 by 4 joined with a 1 by 2 and put it in the inside as shown. to put the 2 pieces together put the 1 by 2 on the under side of...
then put another layer on the top so it is in line with the piece that you put on in the step before. put the layer on so that it looks like this
put the next layer on so that when the m&ms are in it falls down to that spot. have slopes from all ends.
then make a box with no top or bottom and a hole through the middle so that it fits the top of the box and so that it is 3 layers high. you can make i...
once you have done that then you can make a lid. you can make an easy one that is a thin piece that is 8 by 6. or you can go the harder way (not that ...
i hope this really helped with anything at all pls comment and ask as many Qs as you want ;)
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »