Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
this is the eclipse made of knex
make the main platform
this is the second step of the main platform make this TWICE
connect the last 2 steps toghetter
make 2 of these poles and connect it to the main frame
make 2 of these
connect this exactly how it is pictured
connect it all toghetter
make the pole were the car is going to be at the end 2 red rods mid 2 orange connectors start mid:P2 yellow rods start 2...
connect it all toghetter
you can replace the 2 yellow connectors at the top by 2 orange. make the 4 gray connectors at the top for the counterweight Remake this EXACTLY!
also here you can replace the 2 yellow conectors to 2 orange i dindt made that becouse i ran out of knex:P
connect it all toghetter
connect the car to the 2 snowflakes
i used the scream thingy of the starbust spinner pack as counterweight if you dont have this be creative :) such as tape battery packs to it
dont swing it it maybe fall sideways or it collapse
make this 2times or 4 times
connect it as the pictures show if you build the previus step twice use the other side, if you made the previus step 4 times connect it at all poles
connect it all toghetter and you are finished :)
this is the real ride
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »