With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Thankyou for looking at my instructable about vulcan extended clip ask an adult before completing this and good luck this is the finished clip an...
First you will know that you recieve 2 clips at the end there is a grey plastic thing of each clip
Now with one clip remove the screws at take the grey thing apart and do the same with the other clip it should look like this
with the left clip look where the 4 holesw are get a knife or something sharp and ut between the 2 middle holes
now put the left clip with the hole through the grey thing inside and put the right clip through the 4 holes again
now put the top back on and screw together tightly
now it should look like this thankyou please subscribe to timeshifter1 and wait for my next nerf instrauctable
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »