Introduction: Fake Brass Knuckles

Picture of Fake Brass Knuckles

use a foam egg carton masking tape and paint to make cool display brass knuckles

Step 1: Materials

Picture of Materials

-foam egg carton
-(optional) painters tape

outer part 1
-painters tape
-silver paint

outer part 2
-spray glue
-tin foil

Step 2: Pix

Picture of Pix

find an internet picture or use mine
adjust size to fit your hand
then print

Step 3: Trace

Picture of Trace

cut out your template then
trace it onto the foam

Step 4: Cut

Picture of Cut

cut the outline out
repeat 3 to 4 times

Step 5: Glue

Picture of Glue

glue them together then tape them so they will dry properly

Step 6: Trim

Picture of Trim

trim so they are even

Step 7: Covering 1

Picture of Covering 1

tape edges with painters tape then spray paint silver

Step 8: Covering 2

Picture of Covering 2

spray with spray glue then add tin foil to give it a metal finish

Step 9: Ta Da

Picture of Ta Da

you are done


sk8er6 (author)2009-07-04

hahaha, thats the same picture i found to use as a template.

sharlston (author)2009-05-14

may i suggest calling them duckle dusters because there not brass

stephenniall (author)2009-04-21

Wow this is quite underated Very very good

bowmaster (author)2009-03-23

This is pretty cool.

About This Instructable




More by jamiespark:fake brass knuckles
Add instructable to: