Picture of fancy steampunk blunderbuss rifle
25 costume.jpg
1 banister.jpg
2 holder.jpg
4 holderdrilled.jpg
5 candlestick.jpg
6 candle and holder disassembled.jpg
7 steamtank.jpg
8 steamtank screwon.jpg
9 screwhole in tank bucket.jpg
10 trigger.jpg
10a trigger.jpg
11 shank.jpg
12 shake attatched.jpg
12b re enforced shank.jpg
13 lamp.jpg
14 blunderbuss end.jpg
14b blunderbuss end.jpg
15 sight attatchment.jpg
16 blunderbuss bottom.jpg
17 sight attatchment.jpg
18 sight at end mounted.jpg
19 tubing and nouveau lamp.jpg
20 bending tube.jpg
21 fancy end .jpg
22 shank finial.jpg
23 rethread.jpg
24 alternate ending.jpg
This will show you how to build a cool fancy steampunk blunderbuss rifle.
(for the grunge people...its fancy, it's victorian, ...just deal with it).

Remove these adsRemove these ads by Signing Up

Step 1: Materials and stuff

Picture of materials and stuff
Generally it is good to overbuy on everything so you can make some choices.
Nothing in this tutorial is essential, feel free to experiment. I did. Go raid the thrift stores for all the brass you can find.

brass stuff (chandelier, lamp, candlestick, bucket, towel rack supports, coathook, screws, nuts, bolts)
wooden banister
table leg
1/4" wooden doweling
gorilla glue or equivalent
spraypaint (gold, copper)
brown stain
jigsaw or equivalent
screwdrivers,hammer, needle nose pliers, metal file, vice grips, punch (+ random regular tools to suit)
old phonebook or large chunk of wood

Step 2: Paint the banister gold/brass

Picture of Paint the banister gold/brass
Find a nice wooden banister rail and cut it off to the shape you want, and sand it and spraypaint it gold/brass.

I made several of these and the non-oak ones look best because there is no grain, a softwood is smoother.

Step 3: Supports for the boiler

Picture of supports for the boiler
2 holder.jpg
I had a bag of old bathroom parts including several towel rack supports. The supports are two pieces with a screw holding them together on the bottom. This was handy.
They have a plate on the bottom of them to affix to the wall invisibly, and then the support goes on held by a tiny set-screw. I sort of came up with what the whole structure would be sitting and marked the spots and mounted the plates.

Step 4: The candlestick

Picture of The candlestick
6 candle and holder disassembled.jpg
4 holderdrilled.jpg
Brass candlesticks generally come apart being supported by a threaded shaft on the inside holding the cylindrical parts together with a nut on the end. I took this one apart and with the extra "give" in the threads put a hole in the support to put the shaft through and re-assembled it.
1-40 of 43Next »
sonaps5 years ago
I seem to be the only person that finds this irking, but a blunderbuss could never be considered a rifle. Rifles shoot a single shot, at far distance, with relatively good accuracy. A blunderbuss fires many pieces of shot a short distance, and is highly inaccurate. All in all it is an amazing piece of sculpture, but I'm a bit of a gun nut so I had to say this.
.... well, tecnically, a blunderbuss could be considered a rifle if the barrel were in fact rifled, as that is the defining factor. also, a rifle doesn't have to be accurate or shoot long distance. its all in how the gun was made that determines those.

and i would consider a giant shot gun VERY accurate, considering that its practically impossible to miss (at short distance [though short is a reletive word here. i'm sure a real one could hit something at as far as 50+ yards])
solipsism (author)  sonaps5 years ago
well if it makes you feel better it shoots 0 distance and is very inaccurate since it NEVER hits anything, so I guess it can't be a rifle so it must  be a blunderbus  :)
Arbitror5 years ago
Darn, it's only a prop...
Ummm, of course. A steampunk fan should always make props, not real weapons.
im a steampunk fan but i think shadow ops is right
it should be powered by steam though
it is realy good looking though
But what if you burn yourself with the steam? Or it explodes in your face? Precautions are your friends.
solipsism (author)  Mr. Brownie5 years ago
you did notice goggles and gloves were worn?  :)

i have the peices to something i plan to build (a steampunk cannon, if ever i can get the cash to get more pieces[jobless bum....:( ] ) that i plan on includeing a fire extinguisher in. never has to be dangerous. there are multiple ways to make 'functional' weapons that are reletively save. think paintball guns.

though, mine is just supossed to shoot the gas, not a projectile.
I'm joking...
It's time to change it >:D
prop master4 years ago
all i have to say is awesome build its a very nice wepon and i am going to build my own version
MAVREV135 years ago
sick that is beast.
noneedto5 years ago
wooooow nice work mann,

this is freaking wicked ;)
fwjs285 years ago
the main image is Photoshopped, yet most of the others look like a three year old set loose with MS paint
red-king fwjs285 years ago
 that's not very nice.
fwjs28 fwjs285 years ago
ohh, but it is really cool 4/5
Would love to see how you made those snazzy goggles/hat _
solipsism (author)  Hikaru5 years ago
i already did one for the helmet....look me up
fuzvulf5 years ago
Nice work. -for small tubing, I use a screen door spring *(about $3 U.S.) and if you have a harbor freight near you you can buy a nice tubing bender set for around $30. Some of harbor freight's stuff is pretty much disposable but it is hard to mess up a tubing bender. I wouldn't use salt if you plan on keeping your piece for long. with all of the different metals, if you don't get every bit of it off and out you'll get a galvanic reaction which will quickly turn things green and pit pretty finishes.
If you've got room in your freezer, plug one end of your tube, fill it with water and freeze it. You can then bend it without creasing/crumpling it (old trumpet-maker's trick)
You can also fill pipe with sand (packed tight) for the same effect - makes it a lot easier to bend and not kink. (and you don't need a huge freezer or to wait hours for water to turn to ice) but I like the ice idea, never thought of that....
By the way, the project looks amazing, and looking forward to the goggles 'ible!
gfella5 years ago
You should make an operational one. Now that would be cool!
mrthumbtack5 years ago
Great job! Your costume is really intricate and amazing.
You've inspired me to finally post a slideshow of my own steampunk costume:
Doctor What5 years ago
Absolutely excellent. It has a lovely look!
PKTraceur5 years ago
You need steampunked shoes and knee covers... -PKT
ur like... THE STEAM GOD!!!!!!!!!!!
That is for the first pic
i agree, awesome pic
Honus5 years ago
Very nice work! Steampunk's not necessarily my thing but I can really appreciate the craftsmanship that went into this.
Fildain5 years ago
Hey, in the future. If you fill the tubing with sand before you bend it you will not have so many problems with it creasing. Cool looking gun.
Another way to prevent creasing is to wrap a spring around it before bending.
I believe I saw this on how a trombone was made... Fill the tube with water, freeze the water, and then bend it. You might not be able to bend it by hand with ice in the tube, but you never know. Also, you should let the ice melt before you continue.
Iridium75 years ago
looks like something from narnia or the golden compass
thepelton5 years ago
Neat! I think I'll show this to my brother. Incidentally, I remember seeing a cartoon in a book a number of years ago in which a rifle stock was attached to a slide trombone. I think that would make a neat, kinda cyberpunk, project.
xwx5 years ago
THIS IS EPIC!!! seriously it rocks dude I like the spiraly tubes :D
Bobblob5 years ago
Nicely done and very well (and maybe even painfully) documented! I bet it took you hours to put together? Very creative use of spare part and odd bits too. You would be scary if you had proper tools I suspect! A small crit: The wooden banister shape is too pervasive for my taste. I would have changed it ( disguised it more) A hint for bending thin tubing: To reduce kinks fill it with fine sand ( maybe even salt but I never used salt) Thanks for sharing this and I look forward to your punk glasses Instructable.
SinAmos5 years ago
I have dismantled lamp parts I was going to use to make my own on version, but I never got around to it. Lamps are great for parts.
1-40 of 43Next »