Print PDF
Favorite
Email
hello people of earth, and all the aliens intercepting the internet! This is my first instructable so some comments/advice would be helpful.
If you like loud noises, fire, and the smell of burning hairspray then this is for you. I never read more than a paragraph so I'll just cut to the photos
If you like loud noises, fire, and the smell of burning hairspray then this is for you. I never read more than a paragraph so I'll just cut to the photos
Remove these ads by
Signing UpStep 1Film canister gun step materiel
step 2 get materials
you will need:
-film canisters (you can get them for free at black's)
-barbecue lighter (home depo around $2)
-1/4 inch pipe about 4 inches long ( I used brass but copper would work)
-1/2 connector I think mine was for soft pipe. basically you just need a fairly close seal around the film canister
- something to build a handle and base for the igniter. (i used wood)
-duct tape, wonderful duct tape
-hot glue, lots of hot glue
you will need:
-film canisters (you can get them for free at black's)
-barbecue lighter (home depo around $2)
-1/4 inch pipe about 4 inches long ( I used brass but copper would work)
-1/2 connector I think mine was for soft pipe. basically you just need a fairly close seal around the film canister
- something to build a handle and base for the igniter. (i used wood)
-duct tape, wonderful duct tape
-hot glue, lots of hot glue
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
