Finger Snowboard

finished

Step 1: Materials

u need...
-1 sheet of paper
-liquid glue
-popsicle stick

-1 teck deck with wheels
-1 without wheels

Step 2:

take a peice of paper

Step 3:

add glue to half of paper (spread with popsicle stick)

Step 4:

fold in half

Step 5:

repeat to more times you should have a paper roughly 10 1/2x7 cm.

Step 6:

smoosh paper between teck decks.

Step 7:

clamp (48 hours)

Step 8:

trace board

Step 9:

when dry cut out

Step 10:

laminate it(waterproof) or cover in scotch tape

Step 11: Boots

if you want you can attach your own boots i used the hard paper left over(the board trimmings)









please comment