Introduction: Flag Mount

Picture of Flag Mount

I used 3/4 solid round wood pole that is 6ft. long. the mount is made with 1in square tubbing with welded 1in angle stock and then screwed in by self tapping screws attached to another square tubbing that is then attached to the bed on the truck so i can take the mount off when i use my bed cover. 

Comments

mattbragg (author)2012-07-15

I did all my work at TECH SHOP in San Jose, Ca

About This Instructable

724views

7favorites

License:

More by mattbragg:flag mount
Add instructable to: