give your rc car break lights

in this instructable I will show you how to add break lights to your rc car
here is what you will need:
rc car
2 LEDs
screwdriver
some wire
soldering iron
drill
dril bit

Step 1: Drillig the holes

ok so get your drill bits out and find one thats about the same size as the led it better to make it to small then to big then drill holes where you want to lights to be in your car

Comments

[viiru]

tnx!!!

[lemonie]

Reversing lights are white and usually singular. What you have created should be brake lights. Still, it's a good hack

L

[tomo99]

he put that they are brake lights...

[lemonie]

It was originally titled differently (last year). Now it's b r e a k lights...

L

[Acepilot42]

put some on my nitro rc. when you put on the brakes, the throttl servo moves, toutches two wires to make a connetion.

[lollyXD]

hmmm..... cool idea !!!

[stephenniall]

Like lemonie said these should be brake lights ! 

What ive done with my Rc truck is add a piezo Which does the BEEP BEEP BEEP truck reverse sound !

[denona]

ok changed the name

[looking4ideas]

This wont work with hobby grade RC cars =0(

[santy22]

nope, so go buy a cheap, noisy stock car and mod it up!

[crapflinger]

i don't know what voltage is going to the motor on your car...but if it's the wrong voltage you're going to blow the LEDs pretty quick...also running an LED in reverse can damage them (i think)....