Step 3: Gear

the next step is your gear. I usually carry a belt with pouches for ammo extra clips and a water bottle. I usually carry five thousand extra rounds with me at all times because you will never know when one of your teammates is going to need ammo.

....MASK....

WIRE MESH
the mask I use is a wire mesh mask (recomended for battle with guns under 400fps)

PAINTBALL MASK
if you are playing airsoft with guns over 400fps I recomend a sertified airsoft/paintball mask

ammo

to buy my gear I usually just go down to the local army surplus store they have all you need for dirt cheap

but some good places on the Internet are

www.airsoftgi.com

www.airsplat.com

www.Kapowwe.com

 
Remove these adsRemove these ads by Signing Up
nfk11 says: Nov 15, 2011. 1:03 AM
oh and you forgot one its HobbyTron.com go there and its epic
airsoft1017 says: Mar 24, 2010. 5:59 PM
Try getting a neoprene face mask (SKULLSKINZ) they work wonders just wear goggles!!!
yeolddingdong says: Nov 29, 2010. 12:54 PM
ive got a 300 fps red dot sight crossman riffle and a h and k p30 blowback with semi and fully auto 180 fps ( fun for small battles ) what do you think is it a good setup?
airsoft1017 says: Dec 2, 2010. 5:20 PM
get a AEG that is 350-380 fps and get a gas pistol then your setup will b better
yeolddingdong says: Dec 7, 2010. 12:12 PM
i cant get a gas (mom , said isnt it)
airsoft1017 says: Dec 8, 2010. 5:03 PM
what about co2 they are diffrent
lapiosaatana says: Oct 27, 2010. 7:22 AM
wire mesh is okay if all uses goof wire meshs and high quality bbs
KNEXFRANTIC says: Jul 11, 2010. 4:05 AM
actuly i find spary and pray beter for aeg and 20 grams bbs cost alot
miols says: Oct 7, 2008. 5:44 PM
NEVER EVER EVER GET WIRE MESH!!!!!!
JamesTB13 says: May 31, 2010. 1:12 AM
Yeah. the BBs essentially dissolve on impact, and then the wearer gets a face-full of tiny plastic shards and plastic dust. Wouldn't be fun.
mr. cool 384 says: Sep 12, 2009. 11:16 AM
AMEN BRO!!!!!!!!!!!!!!! My friend got sniped in the face when wearing a wire mesh mask and he had to get surgery on his eye to get little plastic bits of bbs out of it
XWXAXDXEX says: Jan 22, 2010. 2:13 PM
was he hit on purpose (in the face) that sucks anyway, did he quit?
chicks dig me says: Nov 7, 2008. 12:28 PM
ever!
Rokko8652 says: Nov 16, 2008. 3:30 PM
Why not? they don't fog. do they blur vision?
airsoftsniper12 says: Sep 12, 2009. 5:44 PM
No, but if you get shot with a high powered rifle close enough it will go right through the mesh.
CapnTac says: Nov 20, 2008. 4:29 PM
My wire mesh mask works Exceptionally well for me. When all of my friends are busy taking time outs to wipe the condensation off of the inside, I'm over on the other side of the field lining up my sights...
mr. cool 384 says: Sep 12, 2009. 11:18 AM
Ur frinds mest have crap masks cause mine has enough breathing holes that it dont fog
machomario1 says: Mar 21, 2009. 4:10 PM
lol wire mesh is horable! if your shot and the bb is heading toward ur eyes, the prt tht wont go though is sliced off then you'll get hit in the eyes.....hurts lots too (shot in eye). other then that, nice guide
miols says: Nov 24, 2008. 5:55 PM
wire mesh cuts up the bbs. making sharp spears of plastic fly into your eyes, WONDERFUL!
AustralLord says: Apr 28, 2008. 8:17 PM
I get the 10k .12 gram Supersonic or the 5k .20 gram Airsplat ammo. The type of ammo depends on what guns you have, or your conditions i.e.: .20 g for wind or very strong guns (over 350fps), or .12 g for under 350 fps guns and good conditions.
casey321b says: Apr 14, 2008. 9:32 AM
yea the airsoft bbs can shatter and go into ur eyes
Katarukito says: Apr 13, 2008. 1:24 PM
wire mesh = bad =(
check the airsoftforums safety catagory
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!