With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
These are modeled after the hanging wall planter made by "woolly pockets" . This company is environmentally friendly and uses fabric made from recycle...
materials: 1/2 yard of thick felt - i got mine from the fabric store for about $4 a yard 2 square feet of plastic - again, from the fabric store, pret...
first step is to cut your pattern to look like the picture above. start by taking apart your paper bag so you just have one big sheet of paper. determ...
fold over a half-inch strip on the short side of your big sheet of felt. iron it down so you have a nice crease. then, sew it down. this will be the f...
lay your felt out and then lay the plastic on top so that the notches are lined up. fold it all up again so that plastic is folded over itself. I supp...
lay out the felt. lay the plastic on top. fold it all together. lay the support strips on top like it looks in the pictures. pin it all in place.
sew down along each side of the pocket including the indented part at the bottom. then sew two little "L" shapes at the top of the supports that will...
put a grommet in each of the top two corners of the pocket (inside the square that you sewed). usually there are instructions on the grommet package, ...
you're done! find a plant to put in it. i think ones that are viney and will spill over the edge look nice. just google vertical wall garden and you'l...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »