Introduction: Headless Knex X Guitar
This is my second Instructable and I hope you like it .
WARNING!! this instructable has 37 blue rods.
WARNING!! this also contains blue flexible rods.
Step 1: Body
Lets start by making the body.
Just focus on the two black moon shaped connecters joined by green connecters
and the spikes.
Don't worry about the blue flexible rods for now.
Make two sides and stick them together with blue rods
Step 2: Neck and Frets
Now we will make the neck and frets
pic 1-2.First just make the frets there very simple just follow the picture.
pic 3-4.Now let's do the back bored or the neck it's simple just follow the picture.
then when you've done all that just put them together and attach them with rubber bands
loop them around and in the holes that's in the middle of the half moon connecters.
you can stick the rubber bands where ever you want.
Step 3: Putting It Together
once you've done step 2 get you're blue flexible bits and do what the picture shoes.
you don't have to add the green connecters but it makes it more comfortable when you hold it like a gun.
if you want to make it into a V just take the top spikes off.
We have a be nice policy.
Please be positive and constructive.