Instructables
Picture of here is how to make a lego police truck
DSCF3175.JPG
This lego police truck is easy to build. Hope you  enjoy it.Here are the pieces you need.
 
Remove these adsRemove these ads by Signing Up

Step 1: Step 1

Picture of step 1
First put the 3 2 x 8 plates on each other.

Step 2: Step 2

Picture of step 2
Next put the 2 x 2 plate under the 2 x 8 plates.

Step 3: Step 3

Picture of step 3
Put the axle pieces on the bottom of your unfinished creation. 

Step 4: Step 4

Picture of step 4
Place the fenders on the front and back of the black plates.

Step 5: Step 5

Picture of step 5
Put the 4 x 4 plate in between the fenders.

Step 6: Step 6

Picture of step 6
Place the black piece on the orange fender.

Step 7: Step 7

Picture of step 7
Put the 1 x 2 plate on the orange fender.

Step 8: Step 8

Picture of step 8
Put the red piece on the yellow fender.

Step 9: Step 8

Picture of step 8
Place the 2 brake lights and the licence plate on the red piece.

Step 10: Step 10

Picture of step 10
Put the 2 1 x 2 plates on each side of the 4 x 4 plate.

Step 11: Step 11

Picture of step 11
Put the 1 x 4 plate on the 4 x 4 plate.

Step 12: Step 12

Picture of step 12
Place the 1 x 2 plate on the 4 x 4 plate.

Step 13:

Picture of
Place the slanted piece on the 1 x 2 plate.

Step 14: Step 14

Picture of step 14
Now,put on the windshield.

Step 15: Step 15

Picture of step 15
Put the 1 x 4 plate on the 4 x 4 plate.

Step 16: Step 16

Picture of step 16
Place the 1 x 2 plate on the yellow fender.

Step 17: Step 17

Picture of step 17
Put the 1 x 2 brick on the 1 x 4 plate.

Step 18: Step 18

Picture of step 18
Put the 2 x 3 plate behind the 1 x 2 brick.

Step 19: Step 19

Picture of step 19
Put the 2 slanted pieces on the 2 x 3 plate.

Step 20: Step 20

Picture of step 20
Put the 2 blue pieces on each side of the 2 x 3 plate.

Step 21: Step 21

Picture of step 21
Place the 4 x 4 plate on top of  the windshield.

Step 22: Step 22

Picture of step 22
Put the red and blue plates on the 4 x 4 plate.

Step 23: Step 23

Picture of step 23
Finally put the wheels on.
mind.the.gap (author) 1 year ago
thanks for the tip aidanjarosgrilli. :)
Density2 years ago
REALLY COOL TRUCK. KEEP MAKING MORE.
I have made a truck like that, only it was more of a bus. Use the cylinders for shocks, put four of them on the wheel block.
M.C. Langer2 years ago
Fantastic! :-)