Instructables

Heres how to make some streamline darts form any darts

Picture of heres how to make some streamline darts form any darts
heres how to make any nerf darts into the sickest streamline darts
 
Remove these adsRemove these ads by Signing Up

Step 1: This is step number one heres what you need

Picture of this is step number one heres what you need
showing you what you need


glue gun

exzacto knife

heavy airsoft bbs or metal ones


extra glue

regular nerf darts

and nerf gun

Step 2: Preping the dart

Picture of preping the dart
Photo 31.jpg
Photo 34.jpg
make this into this. cut the top of the dart off not all the way look below. leave a small platform look below. it should look like this see below

Step 3: The final step

Picture of the final step
Photo 38.jpg
take the dart shaft we just made and hot glue a bb on to it just a tiny dab of it. look below then put a little puddle of glue and roll the dart in it and dip it in a glass of water it should look like this.

Step 4: Your all done

Picture of your all done
Photo 40.jpg
these things are awsome. they go so far and can hurt. but be careful because they can get stuck in the barrrel of the recon or the longshot.
llamma10104 years ago
i hate destroying velcros or suction cuppys cause they do something
Cool mod, I don't have that gun--in fact, I don't have any Nerf guns.
Awesome job!
There pretty cool, but if you use airsoft you will not like nerf, besides being able to freely shoot people without armor.
angusyoung1001 (author)  oh11345 years ago
yea i have a couple of crappy airsoft guns that i play with its way better than nerf but i cant shoot airsoft in the house so heres my answer for that
Obviously you do not know how hard nerf guns can shoot.
8doug8 oh11345 years ago
armor? I Paintball without armor.
angusyoung1001 (author)  GorillazMiko5 years ago
thnx man
angusyoung1001 (author)  GorillazMiko6 years ago
thanks
JakeTobak6 years ago
Why does everybody flip their pics around!? I just modded my Maverick Rev-6 yesterday morning so the turret comes out all the way. Makes it easier to load. It was my first Nerf mod, I think it may be a nice hobby :P
WHY NOT MAKE A INSTRUCTBLE ON THE MOD?
ohhhh yeah Jake Toback the first mod i did, i knew it wasn't my last this is now my all time favourite hobby!!!!!!
Yah, I modded mine, too. Im gonna take the air restrictors off soon, and then stretch the spring a little.
Query? what did you mod if you didn't remove th A.R.
xSaeftx 8doug85 years ago
There are plastic holders attached to the sides of the barrel, and you just cut those off. I think you can find a instructable about that or somewhere on youtube.
I think cheap cameras do that.
shooby theRIAA6 years ago
Really? Never heard of it. One thing it does do is enable the viewer to follow instructions a little better, perhaps, because it's as though you're looking in a mirror. Still kind of goofy though. I searched the internet for a FREN gun, but couldn't find any.
CapnTac theRIAA6 years ago
What? Oh, the picture thing. I thought you were talking about his Maverick mod...
i did that to my nerf gun too. it rocks!
casemaster55 years ago
you look like miss swan
(removed by author or community request)
Did you really have to do that? Anyway, the title is a bit inaccurate. I can't make one out of sticky darts. Other than that, it's good.
cmd12376 years ago
this is completely pointless just make stefans
oh1134 cmd12376 years ago
Well you see for some people it is hard to make the hole through the stefan. If you with to use the dart in an unmodded gun you need to do this.
WurdBendur6 years ago
haha dildo darts
Exactly
CapnTac6 years ago
Since these are 'streamline darts', can they be used in a Recon CS-6 or a Longshot CS-6, since they can only fire streamline darts unless they are modded?
theRIAA6 years ago
oh god, change the first picture.
angusyoung1001 (author)  theRIAA6 years ago
shure