this is a high powered knex rifle that has super high power and good accuracy. this is my third and probably best Instructable so pl ease rate and comment.
high powered flimsy stock ( can someone plz upgrade it)
high accuracy takes a while to cock when you have lots of rubber bands
little pieces needed
Step 1: The Barrel
sorry for the bad pics i couldent take it apart without forgetting how to put it back together. make these bits then put them together.
Step 2: The Stock
the stock is fairly self explanitory but email if you dont understand
Step 3: The Handels
these as well are self explanitory.
Step 4: The Trigger
collect these peices
Step 5: Putting It Together
here is how to put all the peices together.
Step 6: Fireing
pull the rubber bands back and put them on the white connector. then pull the trigger and bang you have made a hole in your wall.