homemade paintball gun

Step 8 FIREING INSTRUCTIONS

YOUR ALL DONE. YOU NEED TO WAIT ATLEAST 24 HOURS BEFORE FIREING. WHEN READY TO FIRE DONT PUMP IT ALL THE WAY UP TO 100 PSI (WHICH IS WERE YOU WILL FIRE IT). I WOULD RECOMEND A TEST AT 30 PSI.
WHEN PUMPING MAKE SHURE THE BALL VALVE IS SHUT AND IF THERE ARE AIR LEAKS YOU WILL HAVE TO START OVER. DONT TRY TO PATCH THEM.

NEVER SHOOT LIVING THINGS INCLUDING YOU OR YOUR FRIENDS. IF YOU DO THEY WILL PROBOBLY BE IN THE HOSPITAL FOR A LONG LONG LONG LONG TIME. REMEMBER ALWAYS TREAT IT LIKE A REAL GUN AND ALWAYS TREAT IT AS IF ITS LOADED.

HAVE FUN AND SATY SAFE.

DONT SHOOT ANYTHING YOU DONT WANT BROKEN.

Comments

[kandarp007]

u r pumping directly to end if pvc pipe ? or bring other equipment for it?

[Rishnai]

Ha, yeah, don't shoot at anything you don't want broken. My dad said "Shoot it at the door" for my test shot. I didn't like the idea of putting a big dent in the door and having a ball bearing ricocheting around our garage, so I shot it at a dirt pile we've got.

[Billgun21]

Its called a BB or in this gun a "Paintball"

[Roceifin]

and please tell me how its supposed to shoot?....it looks like a bunch of tubes connected together for looks....

[uberdum05]

You pump air into the handle which acts as a air tank for storage, then you disconnect the pump and load your ammo into the barrel then open the ball valve.
Look up things before you post comments and use your brain in a good way...... :(

[vennev]

is this a multi shot or does it have to be pumped every time its shot?

[j.c]

hey do you know any way to add a psi gauge?

[vennev]

yea i do it all the time to my projects, if u buy a second tire valve and put it somewhere on the gun were air is and buy an air pressure gauge thats 0 to 120 about 10 incimints and put them together. its a bit more costly but worth it

[joerubberboots9]

damn! sounds a little dangerous, right?