Print PDF
Favorite
Email
Step 13Frame
finally the frame was done. what followed was to mount the brake cables and all the usual stuff to the bike. one issue that had to be solved was how to operate the two front brakes with one handle. talking to a friend he came up with a nice solution: (see next step)
EDIT: two more improvements were necessary after some time
1) mount some cross beams between the handlebar and the front frame (see pic 2 in this step) and
2) mount some more cross beams on the lower end of the pivot to stabilize it further (see pic 3+4 in this step)
EDIT: two more improvements were necessary after some time
1) mount some cross beams between the handlebar and the front frame (see pic 2 in this step) and
2) mount some more cross beams on the lower end of the pivot to stabilize it further (see pic 3+4 in this step)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
