How to Build a Dolly/shop-companion!

ok, this is my first instructable, so please leave me comments on how to improve, i have alot of tools in my dad's shop, so suggestions for new instructables are appreciated, 

Step 1: Materials:

ok; here are the things you are going to need;)
youwill need:
1. a board, the body
2.  swivel wheels
3. drill, sadly, my father only lets me use the hand one:(
4.  a drill bit that matches the size of the bolt(s) on your swivel wheels, in my  case, it was 5/16"
5. nuts or tops for the bolt,( mine came with the shelves i got)
these are optional!!!!!!!!;)
1. foam, i used the foam bag that surrounded our new monitor:)
2.  scizorz, to cut the foam

Step 2: Drilling the Holes

use the drill bit to drill holes in the 4 corners of the board to put the wheels in!

Step 3: Screw in Da Weels!

title says it all, but make sure that the bolts fit!!!!!

Step 4: Foaming!!!!!!

place foam on board, cut holes for da bolts and force it on, then put on the nuts & then cut off all exess foam,

Step 5: You Iz Finished

enjoy!!! tou can paint &/or customize your finished product. put your pics in da comments!!