Introduction: How to Build a Knex Walker

Picture of How to Build a Knex Walker
here is what your going to make.

Step 1: The Legs

Picture of The Legs

make six of these

Step 2: The Frame Part 1

Picture of The Frame Part 1

make this

Step 3: The Frame Part 2

Picture of The Frame Part 2

now make this

Step 4: Put the Frame Together

Picture of Put the Frame Together

Step 5: Now Add the Motor

Picture of Now Add the Motor

Step 6: Now Add Gears

Picture of Now Add Gears

put one grey spacer and two blue spacers on each side

Step 7: The Other Axles

Picture of The Other Axles

do the same on all three axles

Step 8: The Leg Axles

Picture of The Leg Axles

now make six of these

Step 9: The Left Side

Picture of The Left Side

now add these spacers

Step 10: The Right Side

Picture of The Right Side

now add what you see  to the right side

Step 11: The Leg Axles Part 2

Picture of The Leg Axles Part 2

take step 1 and step 8 and make six of these

Step 12: Ading the Legs to the Right Side

Picture of Ading the Legs to the Right Side

add 1 leg to each axle and make shure that each one is clamped oposet of each other like in the pic 

Step 13: Adding Legs to the Left Side

Picture of Adding Legs to the Left Side

do the same as in step 12 just clip them on the oposet of the right side

Step 14: More Gears

Picture of More Gears

do this on each yellow conector

Step 15: Frame Part 3

Picture of Frame Part 3

make 2 of these

Step 16: Frame Part 4

Picture of Frame Part 4

atach what you made in step 15 to the frame

Step 17: Frame Part 5.and Finished!

Picture of Frame Part 5.and Finished!

add this to the front and your done!

Comments

~KGB~ (author)2010-12-23

looks great!

deathandestructi0n (author)~KGB~2010-12-23

thanks

~KGB~ (author)deathandestructi0n2010-12-24

no prob

k-n-e-x(leaved ibls) (author)2010-12-22

i rated 4.00*

thank you!

About This Instructable

1,548views

4favorites

License:

More by deathandestructi0n:project beta.a knex ball machinehow to build a knex walkera knex ball machine
Add instructable to: