Introduction: How to Make a Dart Gun
this instructable is on how to make a simple but deadly dart gun its also pretty deadly DO ***NOT*** SHOOT ANYONE OR ANY CREATURE (unless their a pain in the @$$ like a kid in my class (but still try not to (you might get expelled or go to jail)) anyway this is my first instructable (and probably my best creation) so have fun
p.s. the pictures are not that good because i took them with my webcam and its evan harder because my webcams built in to my computer
Step 1: What You Need
what you will need is a ear cleaner, pin, blue tac, thick rubber band, another smaller rubber band,pen hands and a brain (of course)
Step 2: Makeing the Dart
to make the dart pull off the fluffy bits of the ear cleaner
roll up the blue tack so it is very thin (thin enough to fit into the ear cleaner)and long like in the pic
Step 3: Part 2 Making the Dart
now stuff the blue tack in the ear cleaner till it starts to bunch up on the out side
after stuffing the ear cleaner will blue tack stuff the pin in the ear cleaner (stuff in the side with blue tack) so it sticks out about 1 1/2 cm
now put some blue tack arond where the pin and ear cleaner join and smooth it off.try not to make the blue tack stick out further than the ear cleaner
now you have finish the dart
Step 4: Preparing the Gun / Shooter
to prepare the gun / shooter take out the ink cartride and cut of anything else blocking the ends of the pen
Step 5: Makeing the Gun
when making the gun/shooter put the big rubber band on the pen like in the pic and try to make the thick rubber band stretch about
4-5 cm from the end of the pen (make it so its tight (really tight)) now you can put the othe rubber band on
now put the dart on the rubberband and pull back then let go and the dart will kill you dad (just kidding)