Instructables
The EPG is, "Echo1 Pen Gun". This Pen gun shoots BB's and almost anything that can fit inside the Pen Gun smoothly. Unlike other Pen Guns, this Gun can be used as an ordinary pen, using it to right your English Essay. Spring powered this classroom riot device, it can shoot 15 feet with ease considering it is shooting a BB.
 
Remove these adsRemove these ads by Signing Up

Step 1: Equipment and materials

Picture of equipment and materials
- hot glue gun

- pliers

-paper clip(forgot in image

- knife

- hack saw or scissors

- Bic pen

- Filer

- Sand paper

- Springs

Step 2: Step 1

Picture of Step 1
IMG_0669.jpg
IMG_0670.jpg
Disassemble the pen so that you only have the tube.

1. Remove the yellow tip from the blue connector thing.(the yellow tip is connected to the Ink tube.)
2. Remove the blue connector
3. Remove end cap( i used a screwed driver)

Step 3: Step 2

1. Cut the blue connector at the point where the scissors are placed in the image.
2. sand and file the surfaces that has been cut
3. Cut the bottom part of the blue connector just below the bic logo. Afterwards file and sand it. You will only need the part without the bic logo.
4. hot glue the blue connector bit that can fit inside the pen tube.( push it in so the whole thing is inside the tube. just at one end. The picture next will display what i mean.)

Step 4: Step 3

1. dig a hole into the tube as shown.
2. Start sinking the knife into the pen tube and sliding it forwards to create a long slot.
3. start carving the edges and filing it so it becomes wider. 3 mm wide and length varies on how many springs the pen gun contains.
4. sand edges so it is smooth and remove unneccessary pieces of plastic hanging on the edges.
1-40 of 57Next »
sk8dude115 years ago
during the knife part i sliced my pinky open but great instructable
I did the same thing trying to make the bic bow and arrow crossbow.
ouch. i did that with my thumb, but it was cause i accidentaly left it next to my alarm clock so imagine my surprise when i stabbed my thumb! that really woke me up!
mo5 sk8dude115 years ago
smoooooth
my_2_cents (author) 3 years ago
Hi,
What i did was first i created a slit, then fit a small filer in there just file away the plastic, once the slot is just big enough, id use the knife again to shave the edges.
jeiy3 years ago
i'ma having a hard time making the slot wide, any suggestions???
Win Guy3 years ago
Lol - It says at the top, "Step 3: Step 2" :D
Great ible!
Win Guy
hello1231233 years ago
i just realized, that could double as an auto loader magazine :P

so you pull down the lever all the way and lock it, fill it up with bb's, attach the top part to a compatible gun's feeder, unlock it, and that way it can auto reload a gun. ofc. such gun would require quite some work to make, but it is possible and it would be quite epic (i guess a type of bolt action could be modified to work with this. all you'd have to do is make sure that where the BB's enter from there is a small "trap" kinda thingi which would stop the BB from sliding right out, and the spring would have to have a cover so that as you pull on the bolt a BB doesn't get stuck in the spring, thats about all, and it should work)
my_2_cents (author) 6 years ago
i just cutted it as straight as i could. you could draw a line on what u want to cut with a texta
did you just say cutted?
WOW! I had this ame idea like 2 months back. Well good instructable, its alo t better than the other pen guns.
Except I glued a screw to the inktube instead of an ink tube.
superhornt4 years ago
the theory behind this gun is good, but i epic failed and wasted 4 pens because i couldnt get the firing mechanism/charging handle attatched correctly, and the springs slipped out of place all the time. it never actually shot any of my ammo.
rstdnm4 years ago
 omg... the "charge" mech. is simple yet soo cool. awesome. I'm gonna try to make this thing.. best pen gun design ive found...
CaseBoy4 years ago
 i love it the instructions where a little confusing you should sat that the blue guard has the writing piece right next 2 it.
my_2_cents (author)  CaseBoy4 years ago
i dont get what you are saying :S.
 its no big deal now i juts didn't under stand it
nice gun it takes concept of zip gun !!!!!!!!!
my_2_cents (author)  greymatter214 years ago
thanks dude ;D
overall its tha best pen gun i found on this site:)

}][{
how far does YOURS shoot? pls reply!
my_2_cents (author)  firefighter13334 years ago
around 10-15 metres.
wow, better then i thought it would,  i thought it would loose hight at like 5/6 metres. ty for quick reply!
my_2_cents (author)  firefighter13334 years ago
np
BEST PEN GUN EVA!!!!
my_2_cents (author) 5 years ago
thanks!
An Villain5 years ago
tin-foil or aluminum-foil balls are easiest.
silvaspade5 years ago
cool i made 1 spring and rubber band powered and it goes much further
Fir-Ball5 years ago
Most. Ghetto. Instructable. EVER.
all i want for christmis is my two cence
all I want for Xmas is a cow but my mum says they smell too bad
Me wants an cow, howz do dat//
sniper4life5 years ago
just so yall know most of the time you can pull out the blue writing end and its really easy to bite the other one off it pops right out
rawr this is so F-ing hard!
xZCodmaNZx6 years ago
how do you get the slot straght?
u spelled step wrong in step 1
It was in step two, and you spelled you wrong. :P
oops yea we all make mistakes lol
heheh
my_2_cents (author) 6 years ago
lol, thanks, i wil change it later. right now i cbf and net slow because im capped
1-40 of 57Next »