Instructables

How to make a pipe door spring gun

Step 4:

Picture of
now your done just slide in the spring into the pipe then you load it up by inserting a item into the front of the plumbling pipe and onto the machanical spring.then to grab the pipe and then point the front of the pipe towards the target to aim then pull back the spring and to shoot just let go. then if your spring is sprung out of the pipe just slide it back into the pipe then repeat it again for the next shot now remember if you are using paintballs use 68 cailber paintballs just keep in mind not to pull to hard otherwise the string will snap and that includes just pulling then twisting and then let go or just pulling on it's own too much now if it does snap just restart starting at step2
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!