Introduction: How to Make a Siemese Rubiks Cube

I will be showing you how to make a simple rubiks cube mod. What you will need is 2 rubiks cubes any type, super glue, butter knife, a little time, a little effort. If you can handle this keep reading.

Step 1: Preparing the Cubes

Pick one cube and one row I always seem to pick one of the Green rows and remove one row. As shown in all the pictures.This is where you use the butter knife.

Step 2: Glue Cube to It

Now you arrange the colors on the other cube to match and super glue them together.

Step 3: YOUR FINISHED

Yay! You did it ha or maybe you didnt whatever dont be too rude this is my first instructable.

Comments

author
ddolbi1 (author)2010-08-05

=_= that's not the proper way to make a siamese cube... The entire middle won't even turn... sigh.... U're supposed to take out the three pieces on one of the edges on one cube, take the same three pieces out of the other cube, chop up that little piece that sticks out on each little cubie, and glue it on to the cubies that hasn't been cut yet. Basically, u'r supposed to make a normal rubik's cube, with the three pieces being a hinge to BOTH the cubes at the same time. -___- since I'm soo bad at explaining, here's the PROPER way to make a siamese cube. http://www.speedcubing.com/ it's under "puzzle building"

author
HaileyG6 (author)ddolbi12017-02-22

you're*

author
freakyqwerty (author)ddolbi12011-04-24

Can't find it :^(

author
AJMansfield (author)freakyqwerty2012-11-01

Me neither.

author
ddolbi1 (author)AJMansfield2012-11-01

I think they took it off the site. If you guys want, I can draw up a diagram to show you how to make it. I might also have my old siamese cube to take a picture of.

author
AJMansfield (author)ddolbi12012-11-01

That would be great, actually.

author
ddolbi1 (author)freakyqwerty2012-11-01

Or.. sorry. Found the link.
www.speedcubing.com/ton/siamese.htm

author
TheKnexChicken (author)2016-06-16

you can just cut a row in half on both cubes and glue them together so only the F face and B face are the ones that can't torn on both cubes. R can turn on the right cube but L can't on the right and vice versa.

author
Parthiv Joshi (author)2015-11-28

you

author
CommonSparta (author)2012-06-17

This is just another challenge, yes you can only move certain sides but that in itself poses as a challenge, you must find new ways to solve the 'cube' you cant just solve it as two cubes you must come up with new techniques and therefore it's just a new and different challenge! I realize there are some parts that are stuck and can't move but that is one of the things that makes it a whole new challenge to solve this if you get tired of solving a normal 3x3 rubiks cube! And as with bad english or not proper English, I'm way more of a math person so give me a break my goodness this is a Internet site not a college English paper! :)

author
paperairplanecreator (author)2011-11-15

That's odd looking..

author
l3owzaaaah (author)2010-07-23

I love how whenever a decent looking girl makes an instructable, no one leaves her alone. Also apart from a cool looking double cube, I don't really see the point in this.

author
vIQleS (author)2010-05-23

If you joined just one corner peice, you'd be able to mix and solve both - no?
 

author
l3owzaaaah (author)vIQleS2010-07-23

yes, but only if you put them together when they are already solved.

author
john henry (author)2010-04-25

I like how you smile in every photo. you look very exited!!! ^_^
nice cube except You cant call it a cube now.

author
Gheaa (author)2010-03-12

i wan't to make it, because that's very cool

author
thirster42 (author)2010-03-08

yeah, it looks like the cube that you didn't remove the row, you can sramble most of the cube, but the cube with the removed row can only be scrambled on the outside.

author
evanwehrer (author)2010-03-01

Looks nice! Oh and the cube is cool too!

author
minimalista (author)2010-02-28

Cool Instructables! Mayebe it doesn't works but you have really nice nails!!!


Bye

author
derttiej (author)2010-02-22

it should work except the pivit point which is only 3 blocks,  nice instructable

author
derttiej (author)derttiej2010-02-22

i take that back, you couldn't turn in all direction, but it defiantly makes cool art

author
bassclarinet23 (author)2009-11-25

Looks pretty awesome! You should try to make one that performs like a cube!

author
pyro4226 (author)2009-08-26

great. i made 1 and ur guide is perfect

author
FlameSnake (author)2009-05-16

Cool concept.. Nice nails same as mah friends. i wont be doing this cuz i cant solve a single cube AND i don't own one >.<....

author
KentsOkay (author)2009-01-26

Pretty cool, i guess this makes the cubes unplayable?

author
CommonSparta (author)KentsOkay2009-03-15

It is a new challenge if you already know how to solve the cube... Because of the fewer slices you can move the harder it is to solve.

author
Kiteman (author)KentsOkay2009-01-26

I don't think it will be totally playable, but I'm guessing that a couple of "slices" will be usable on each cube, maybe in two planes.

author
WeeklyProjects (author)2009-03-14

Nice guide. It could however, use photos of it scrambled.

About This Instructable

24,339views

14favorites

License:

More by CommonSparta:how to make a siemese rubiks cube
Add instructable to: