With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
A fun sound sculpture that rotates and scrapes aluminum wings on the head of a pin!
1. 3V Lithium battery2. Duck tape/Electrical tape3. 3V Micro Vibration Motor4. Aluminum Foil5. Wire6. Pushpin7. Needle-nose Pliers
Make a loop at the end of the wire with the pliers and squish the foil together in the center, then fold up under the bend in the ...
Tape the ducktaped wires to the smaller top part of the motor. Be sure not to tape over the two halves of the motor or it won't move. ...
Make a very careful cut in the plastic tubing that surrounds the red and black wires of the motor and pull off the tubing with the pliers to ...
DIY Pushpin Dragon Sculptureby bobes360
Pushpin Wall Art and Bonus Organizerby jangosgirl
Light Sculptures by Manfred Kielnhoferby contemporaryarts
Painted Cardboard Wall Artby laurisha2004
Silicone Rubber Sculpture Techniquesby Thinkenstein
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.