Instructables
Picture of how to make a tire tracks paracord bracelet
Followers and rest: Sorry for my lack of depth on this instructable. The descriptions are no longer crappy and misleading. Enjoy!
 
Remove these adsRemove these ads by Signing Up

Step 1: Supplies

Picture of Supplies
To make this bracelet, you will need a strand of paracord that is 7-ish feet long, two strands of identical length, each a little longer than the desired circumference of your bracelet, a lighter, scissors, and a suitable buckle.

Step 2: Get Ready

Picture of Get Ready
IMG_0313[1].JPG
Pull the two short strands through a loop of the buckle. Burn their ends together with the lighter.

Step 3: Start the Knot

Tie the cobra knot around both strands.

Step 4: The Cobra Knot

Picture of The Cobra Knot
Tie the aforementioned cobra knot on one strand, alternating after each knot.

Step 5: Finish Up

Cut the ends of the paracord off that came from the weave and burn them. Sorry for the lack of quality photo for this step.

Step 6: Finish Up pt. II

Picture of Finish Up pt. II
Once you have tied the weave leaving an inch or so, pull both of the remaining strands through the other loop of the buckle and burn them like in the second step.

Step 7: Done

Picture of Done
Nice work.
elliemae611 year ago
Made this - great instructions!!! When I looked at the back I noticed I could see the 'hitch' or inner cords. So I made a two color hitch, and two colors for the weaving cords and kind of did it upside down (well not really - I attached my buckles to my jig upside down, then did this weave), What I ended up with was a 4 color bracelet
paracord4color.jpg
hbombinator (author)  elliemae6110 months ago

Cool!

Mr.19112 years ago
So, my question is, are you cobra weaving each separate inner strand? Love to know cause I want to make one. Thanks
hbombinator (author)  Mr.19112 years ago
Sorry. Didn't check comments. yes. cobra weave each strand.
Thanks! I can't wait to make one.
I remember learning this from a YouTube video last summer... the original designer calls it the Stiched Solomon Bar (its also featured on Stormdranes blog)
Thanks, I'll look into that. This is a cool looking bracelet to.