loading
HOW TO MAKE AN AIR GUN IN 5 SIMPLE STEPS

MATERIALS:
1 BOTTLE
1 GAGE
1 LONG PIPE
1 HOSE GUN OR AIR LINE FITTING
1 COPPER PIPE
1 CONNECTOR (BOTTLE TO PIPE)
1 BIKE VALVE

Step 1: Makeing the air chamber

Picture of makeing the air chamber
C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0038.jpg
C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0040.jpg
C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0037.jpg
C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0039.jpg
C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0035.jpg
FIRST GET THE BOTTLE AND THE BIKE VALVE. DRILL A HOLE IN THEN BOTTLE BIG ENOUGH FOR THE BIKE VALVE TO FIT THROUGH THEN DROP THE BIKE VALVE IN THE BOTTLE THEN POKE IT THROUGH THE HOLE GLUE THE BIKE VALVE SO AIR CANT GET THROUGH OR YOU CAN USE PVC PIPE INSTEAD OF A BOTTLE.
 
-CCCP-1 year ago

Lame!

Supercoke4 years ago
Jeez, could your pictures be any blurrier?! And whats with the caps lock? please, try to be a little more informative, and not sound like your yelling all the instructions at everyone. I'm surprised this hasn't been confronted by the admins. I like your ible, it just needs alot more work before you publish.
smallebee5 years ago
neet im posting one soon
Lol, dude, add a disclaimer and a warning. Just in case someone got one explode in his face and went to the hospital and point the finger at you (aka. you get sued).
bbeharee5 years ago
 the pics are a bit blurry..

xZCodmaNZx6 years ago
TURN OFF THE CAP LOCKS LOL
 yeah... LOL

Im getting a bit confused what do i ask for at the store when I said i needed something to act like a trigger but cut the air off untill i fire the guy thought I was crazy. Please help!!!
i got rid of it lol BUT i will try to make another but i have a flamethrower in the making for a ible
i have done a miniture Version off this but i Made it stronger using a technique bottle rockets use with Getting a larger bottle and Shrinking that down to the same size Making it thicker !
HOW DID U MAKE THE BOTTLE SMALLER?
You cut a slit down the middle Put it over the Other bottle and put a blow torcg (or lighter) near it so it melts it but not to a extent the plastic burns And spin it very slowly it will eventually melt
thanks why dont you post a instructable on the mini version
sharlston6 years ago
what sort of glue would i use?
how far does this shoot?
Lftndbt7 years ago
Could I make a suggestion in the name of public safety?.. Dude tape and relatively high pressures don't mix... I get the shakes when I get my galvanised/copper fitting rifle up to 90PSi. If that coke bottle goes, then so's the side of your face.. NOTE TO ALL: Coke bottles are NOT pressure rated! Yes you can get them to 145Psi before they NORMALLY blow up... BUT there is just too many variables... eg.. Heat of plastic, deterioration factor, physical damage... These factors exclude these vessels from having a PSI rating.. If your going to the efforts of making this please .. go to a plumbing shop and get pressure rated fittings.... Then happy shooting!!
yes coke bottles are pressure rated !!! call them and ask for the max psi they will tell you for a 2L bottle that it is 200psi for a non stressed bottle, for stressed it 150psi (and when i same sressed i mean like theres a hole made in it then patched!!

well nice work but instead of using a bottle us 2in. pvc !! its max psi is 600 so you want have to worry with it blowing up !!! and before you buy any check its max psi take the one with the greatest max psi!! and the put the valve in it !!!!!

have fun shooting !!!!'
tjmortenson7 years ago
dude i think you need to get a new camera
It's really ironic... You don't capitalize the title etc, but you write everything that doesn't need to be in caps with capslock on...
MAYBE HIS CAPS-LOCK KEY IS BROKEN. TOO BAD IT WAS STUCK IN THE ON POSITION WHEN IT BROKE.
Broken? If you're missing the key use a pen to push the rubber button down. If your keyboard is broken tape down the shift key so that your font isn't in caps... OR just buy a new keyboard... they're pretty cheap....
lemonie8 years ago
You appear to have used some kind of Sellotape(R)?
Tut, tut. Examples of acceptable tapes include:
Duck(R) Tape
duct tape
Gaffer tape
http://www.gaffertape.com/
jay, you don't know what you are doing a blow gun like that doesn't have nearly enough flow to power a gun with a barrel size like yours and that thing is not gonna take a 100 psi charge without something giving and did you make 2 accounts just so it will show up as a collaboration?!
And WTF you didn't even use hose clamps on those tubes!!!!!!!!!!

btw a soda bottle can take anywhere between 50 to 160 psi

if anybody wants to see some proper tutorials, go to http://www.bcvids.com/dload.php?action=category&cat_id=3, register, and download the tutorial videos