loading

here is our our first tutorial on Instructable so be indulgent. This tutorial shows the method of using an Arduino UNO board as a PIC microcontroller programmer. This method has been tested with PIC 18F2550 and 18f4550 but can be used to program the following pic:

  • 18F2420
  • 18F2455
  • 18F2520
  • 18F2550
  • 18F4420
  • 18F4455
  • 18F4520
  • 18F4550

The video is in french but sub in english.

That is the site of the author of the program that we use :

https://sites.google.com/site/thehighspark/arduino-pic18f

<div>Hello how have I just seen your project and I wondered if it is possible to use it but for a pic 16f628a, given the little knowledge I have in programming pics, could help me to get the necessary code and circuit, I would greatly appreciate it.</div>
<p>I have tried doing this instructable for quite some time but it keep showing the error cannot connect to programmer.</p>
<p>i have used 220 ohm resistors. This ic already had a program in it before I tried programming it. Please help</p>
<p>I have tried doing this instructable for quite some time but it keep showing the error cannot connect to programmer.</p>
<p>I have tried doing this instructable for quite some time but it keep showing the error cannot connect to programmer.</p>
<p>I have tried doing this instructable for quite some time but it keep showing the error cannot connect to programmer.</p>
<p>I have tried doing this instructable for quite some time but it keep showing the error cannot connect to programmer.</p>
<p>I have tried doing this instructable for quite some time but it keep showing the error cannot connect to programmer.</p>
<p>Do you know if the PIC12F1571 will work with this too?</p>
<p>we have not done the test , sorry</p>
<p>but I do not think its going to work</p>
<p>good job</p>

About This Instructable

4,347views

29favorites

License:

More by OpenhardwareA:how to program a PIC 18F2550 or 18f4550 with Arduino UNO 
Add instructable to: