iCylinder

Step 2 Make Container

First you must hold the object behind the plastic and outline it with a sharpie. The dock adapter will go on top and back, the speaker in front of it, and the amplifiers volume controls to the side. the clock goes in the front, a slot for the lightswitch in the back, and a hole for the fan. Use the knife and small saw to cut out holes. Use the 1/4 inch file to file a slot for the extention cord. The case in the pictures looks pretty banged up because i had to try several times to get this project to work. Also you must saw off the center peg of the CD stack base as close to the bottom as you can get.