Step 4: Make Ipod Jack
To make the ipod jack, you must know how to wire it. If you are looking at the front of the ipod jack, pins 2 and 3 are audio output and pins 16 and 23 are power input, 15 being neutral and 23 being hot. The metal case on outside of jack is ground, make sure you have a wire coming from that too. Once you have those figured out, attatch the jack to the ipod through the dock adapter and hotglue it into place. Once it has cooled, remove the ipod and cover the bottom of the jack in electrical tape. An optional is to attatch the headphone cord to the audio output wires ont the jack, so your iCylinder can play any kind of music player.