IPhone 4/4S Bumper Case.

It protects your iPhone.

Step 1: IPhone 4/4S Bumper Case. Step 1.

In order to make this iPhone case, you will need access to solid works, and a maker bot. 

Step 2: IPhone Bumper Case. Steps 2-6

Step 2- Open Solid Works
Step 3- Open a new part
Step 4- Open a sketch on the front plane
Step 5- Sketch a corner rectangle on the plane
Step 6- Smart Dimension your rectangle to 4.6 inches tall

Step 3: IPhone Bumper Case. Steps 7-12

Step 7- Smart dimension the width of your rectangle to about 2.36 inches
Step 8- Fillet the 4 main corner of the iPhone to a radius of 0.2 inches
Step 9- Make a shell in the center of the rectangle to be about 4.2 inches from top to bottom
Step 10- Then, make another shell on top left side of the case, to be about 1.2 inches. (picture on next page)
Step 11- On the top of your iPhone bumper make a shell to be about 1.75 inches (picture on page 5)
Step 12- Repeat step 11 except on the bottom part of your bumper.

Step 4:

Step 5:

Step 6:

ENJOY YOUR FINISHED IPHONE BUMPER CASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!