Step 5: Additional detail 2
1) You will have seen the description of the small bends that need to be made to the small binder clip handles, attach them now.
2) Remove the bottom handle of the large clip you have been using and fold down the top handle so it's out of the way
3) Open the last large clip and attach over the back of the assembly as shown in the middle picture
4) Fold back the handles you moved earlier, your stand is ready
Hope that makes more sense , sure is harder than you think writing detailed instructions.
2) Remove the bottom handle of the large clip you have been using and fold down the top handle so it's out of the way
3) Open the last large clip and attach over the back of the assembly as shown in the middle picture
4) Fold back the handles you moved earlier, your stand is ready
Hope that makes more sense , sure is harder than you think writing detailed instructions.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
