Print PDF
Favorite
Email
Step 2Seperating the Halves
1. Remove the brand sticker, under which you will find a screw holding everything together.
2. Unscrew the screw, holding the 2 halves together to make sure they don't fly apart.
3. Remove the screw side cover. Be Careful not to lose the tiny ball bearing that acts as the latching mechanism to keep the cable extended. If you lose this, the headphones will not stay extended.
4. Put the ball bearing in a safe location.
2. Unscrew the screw, holding the 2 halves together to make sure they don't fly apart.
3. Remove the screw side cover. Be Careful not to lose the tiny ball bearing that acts as the latching mechanism to keep the cable extended. If you lose this, the headphones will not stay extended.
4. Put the ball bearing in a safe location.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
15
Apr 25, 2010. 8:29 PMknex_mepalm
says:
My one seems to be two halves glued and stuck together with hinges on the ends, I wish i had a picture. I cant get them to seperate.
Reply
 |
Add Comment
|
