Print PDF
Favorite
Email
Step 3Taking it Apart
1. The spring under the plastic rotating center hub which the cable is wrapped around is slightly wound up. Be careful to prevent it from shooting out when lifting up the hub.
2. Take note of how the old cable was routed through the hub. You will want to route the headphone cables the same way.
3. Remove the old cable from the hub.
4. You should be left with some parts that look like the picture.
2. Take note of how the old cable was routed through the hub. You will want to route the headphone cables the same way.
3. Remove the old cable from the hub.
4. You should be left with some parts that look like the picture.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
15
Apr 25, 2010. 9:01 PMknex_mepalm
says:
Sorry for the annoying comments, but I took ti apart and as soon as I lifted it the spring came shooting out? any idea? there is a hook at the end a a swiggle at the beginning.
Reply
 |
Add Comment
|
