Print PDF
Favorite
Email
Step 2Open the case
Pick up that screwdriver and start taking screws out. The ultimate goal is to access the IR-blocking filter that's right in front of the CCD. The exact components you'll need to take out in order to get there will vary from camera to camera, so I will only offer some generic tips:
- get a plastic container (I used an ice cube tray) to put the screws in as you take them out. There are a lot of little screws and you will never remember the order you took them out unless you organize them somehow.
- take pictures as you remove screws. This will help when you go to put the camera back together. Again, there are a lot of screws and it is incredibly helpful to have a photographic record of what went where.
- get a plastic container (I used an ice cube tray) to put the screws in as you take them out. There are a lot of little screws and you will never remember the order you took them out unless you organize them somehow.
- take pictures as you remove screws. This will help when you go to put the camera back together. Again, there are a lot of screws and it is incredibly helpful to have a photographic record of what went where.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
