Introduction: Iphone Selfie Stick
now a days , selfie sticks are in fashion for clicking selfies or groupies . there are many variety of these selfie sticks available in the market for every type of mobile phones ,go pros and cameras a nd are costly too.
in this instructable you will learn how to make a selfie stick for iphone 4 and shutter will be controlled by earpods.
Step 1: Material Required
1)iron/pvc pipe (about 2cm diameter)
2)old iphone cover
3)aluminium sheet (1mm thick and 2cm x 10cm)
4)2 screws with nuts
Step 2: Lets Start
-take the aluminium sheet and measure and mark the width of the cover this will be the mark from where we will bend it .
-now drill 2 holes about 3cm apart, following this mark the holes on the pipe and drill them too.
-now take the aluminium sheet and bend it to the angle 75degree.
-place the aluminium sheet to the pipe with the help of screws
-now with the help of glue gun ,paste the iphone cover on the aluminium sheet as shown in pictures
-now , just place the iphone in the cover and connect the earpods and take a selfie .
Earpods are connected so that you can control the shutter of iphone's camera by volume up(+) button on earpods.