With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
this is my first instructable i will show you how to make a ipod nano case from half a deck of cards.
-deck of cards -pen -white glue -paint brush -ipod nano -sharp knife -tape -ruler
take one card and put a ring of glue around the card
take the paint brush and spread the glue around.
put another card on top of the glued card and line up the edges
repeat steps 2,3 and 4 over and over until you have used about half of the deck of cards.
trace your ipod onto a card but remember to leave a spot for the headphones.
take the traced piece and cut it out then put it on top of the deck of glued cards and trace it onto the deck.
take your sharp knife and cut into the deck on the traced line you made with pen. cut until you only have about 5 cards not cut.
take your ipod nano and see it it will fit in or not. if it does not cut the cards down a little
take a ruler and measure how far the screen is in. take one card and cut it out
to glue it on the stack of cards only glue 3 sides to you can take your ipod nano in and out when you need to charge it or what ever.
glue two cards front to front
tape the cover on and make the cover like a hinge. put an apple sticker on the front and your done enjoy. :)
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »