Instructables
Picture of iron man deluxe helmet
08_05_0.JPEG
ironman-mark2.jpg
I was browsing this site and saw the iron man equipment and decided to try my own please note the product will not be finished until Friday 8th of august
 
Remove these adsRemove these ads by Signing Up

Step 1: Step 1 making your base

Picture of step 1 making your base
to make your helmet base you need to blow up a balloon to the size your head and cover it in paper mache 2 to 4 layers depending on how hard you want your helmet

Step 2: Step 2 formation of the helmet

once your base is dry you push a sewing needle through the back and pop the balloon inside once you have done this in the bottom/back you need to cut a hole to fit your head in .

Step 3: Step 3 face of iron man

Picture of step 3 face of iron man
08_05_14.JPEG
now you have made the hole you can start to make the mould come alive with "funky foam" this averages at about 49p-£100 tou will need four sheets of red and two of yellow first you start with making the detachable front i have drawn this template onto orange card for better visibility to stick this together i reccomend super glue or double sided tape.

Step 4: Step 4 the helmet side and back

Picture of step 4 the helmet side and back
08_05_15.JPEG
for your red helmet you must make each panel according to the picture on your red funky foam depending on the head size your panels will be bigger or smaller again i recommend you stick on with super glue or double sided tape . please note only use 3 sheets to save one for later details.

Step 5: Step 5 detatchable or not

if you want a detachable face or not dependends on wether you skip this step or not if so then you need to take the yellow foam face plate and temperelily stick it to you unplated front once stuck down you must draw in pencil a line that follows the edge once you have done this you must cut out along the pencil line slightly inwards so you can push it in and pull it out

Step 6: Step 6 not detatchable

if you do not want a detatchable face then this is your page
temperelaly stickdown your yellow foam face plate and draw around it with pencil but cut slightly inwards after this you must super glue the face into the hole.
1-40 of 101Next »
avenger2211 months ago
not bad. may use this instead of super-lukes' design.
im guna haf 2 finish it, only 2% credit 2 the guy though, should be done by end of year
Dimensionz3 years ago
I thought this was an amazing looking nurse mask from Silent Hill..had no idea it was Iron Man.
Tystarr5 years ago
What happened to the project? Its September now.
Now its October! I think he foogot.
now its november
tommorow it wil be december
January
January too lol
valentine's day...
My birthday is tomorrow... I think we can safely assume there will be no follow up.
Yeah problely
dombeef dombeef5 years ago
And happy birthday!
HA! middle of march!
Yeah
(removed by author or community request)
Yeah!
(removed by author or community request)
Yeah
(removed by author or community request)
I would care. And its april 2nd >.<
April 4th...
(removed by author or community request)
Why? Its ok
Oh, God... What have I done? I didn't mean to start all this spam. ... mmm... Spam...
MMMM.....Tasty spam... but ,By " ... decided to try my own please note the product will not be finished until Friday 8th of august " He ment 2009 or 2010! lol!
Lets go to his house, and use my favorite pickup line: "Hey does this rag smell like chloroform?" Then tie him up and FORCE him to write the rest now.
Yeah....(lol)
(removed by author or community request)
LOL And i'll get the pepper spray.....
May 4th.
May 4 3:36 PM
dombeef dombeef5 years ago
He Failed
Yay
Lots of replies!
Yes its June 23rd... no update. :(
Yeah June 24th
June 25th now
August 18 2009 today.
how far to the right can this get???
1-40 of 101Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!