Instructables
Picture of knex Swift gatling gun
This is a knex gatling gun that I built and is very easy to build and does not take very many pieces. It has 8 barrels and shoots about 10-20 feet which is not that great but has a rate of fire of about 8 every one or two seconds. It is not hand held so there fore does not really have a true trigger but to fire all you do is push a lever down. it takes about 30 or 40 seconds to load 8 yellow rods. This is my first Instructable so i am open to any criticism.

Hope you like it lets start building!
 
Remove these adsRemove these ads by Signing Up

Step 1: Create the barrels

Picture of create the barrels
IMG_4596.jpg
IMG_4597.jpg
IMG_4598.jpg
IMG_4599.jpg
IMG_4606.jpg
in this step you will create the barrels

Step 2: Creating the stand

this is the stand for the acutual gun part and in the

Step 3: Assembly

Put together all parts of the gatling gun and ask if you have any questions

Step 4: How to load

Picture of How to load
IMG_4641.jpg
IMG_4642.jpg
this is how you load. On this gun there are no ramrods there are just rods with a rubber band on top. Follow the pictures to load and do that to every barrel then to fire just pull the yellow rod handle up.

thanks for building this gun
RGalliath4 years ago
the deasin is flimsy but cool
smattman225 years ago
that was a waist of my time >.> no offence
Braeburn5 years ago
yay a gatling gun that wont take up all my pieces :D
sprout_less (author)  Braeburn5 years ago
yup that kinda why i built it
pls5 years ago
Kindof basic, but neat I guess.
sprout_less (author)  pls5 years ago
yah hey i build this a long time ago and am advancing to bigger better stuff and i kinda thinnk this sucks so yah, hey and should i make instructions for a sniper that usees killerk's barrel but Viccie.B1993 trigger?
pls sprout_less5 years ago
Oooo yeah, its great. I'm gonna start work on it soon.