Introduction: Knex Bow and Arrow

Picture of Knex Bow and Arrow

this is a knex bow and arrow. (duh) this bow is larger than the small bows but less complex and part wasting than the bigger bows. and don't forget to rate it.

Step 1: The Middle Part.

Picture of The Middle Part.

the middle part is the part that the arrow fires through.

Step 2: The End Pionts

Picture of The End Pionts

the parts on the ends of the bow is what we will make next. it wont let me use the yellow boxes now! :( so just follow the pictures.

Step 3: The Bars in Between

Picture of The Bars in Between

the bars in between. (duh)grr! still no boxes!

Step 4: Put It All Together.

Picture of Put It All Together.

puting it all together.

Step 5: Rubber Bands and Arrow

Picture of Rubber Bands and Arrow

put on the ruber bands. you will probably need to connect some of the rubber bands together. oh and i connected to many. so i didn't use the ends. so pay no attention to the rubber bands hanging off. then just make the arrow.

Step 6: Firieing

Picture of Firieing

fireing put in like that and pull all the way back.


super knex builder (author)2011-09-26

Cool! :)

Dumchicken (author)2011-03-01

can u add a little more lite (duh)

bomb voyajue (author)2009-02-27

the pics r fne good work too MAKE AUTO MULTI-SHOT RPG

A full auto rocket launcher in other words? O.o good idea... I'll start work immidiatly. :D

ILIKEPIE333 (author)2009-05-29

did you use a camera phone?

plasmaspy (author)2008-07-02

just posted my knex compound bow everyone!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Crossbow747 (author)2008-03-30

i have a question how do i change my person to like a diffrent person/thing

i dont know what u mean. u can upload pics for your dude's pic that is next to comments.

mega man 4bm (author)2008-03-28

i made a little mod to the middle part. i put 2 v shade connecters so it fits around the orange connector perfectly.

really? plz post pic i would love to know.

RokuXIII (author)2008-03-25

I really need a true trigger gun. All the ones I've built were block trigger ones, so it'd be great if you could.

Ltcheesecracker (author)RokuXIII2008-03-26

mepain's rifle

i would suggest this one. make the expert version for a good true trigger rifle. it takes alot of parts but it is so worth it once you build it.

RokuXIII (author)2008-03-22

Really cool looking. HOw far can it fire?

Ltcheesecracker (author)RokuXIII2008-03-23

a good 40-50 feet at a good pullback.

well mabey 30-40 feet. 40-50 with big angle. also i made an angle drawing! of the angle for 40-50feet. \ \ /] /_] :)

aww! my angle posted funny!

knexguy (author)2008-02-21

Looks good and simple, but abysmal picture quality.

Ltcheesecracker (author)knexguy2008-02-21

yeah my flash was acting funny. it was going all white out every picture so i didn't use the flash.

knexguy (author)Ltcheesecracker2008-02-22

Oh well, good concept.

PineapplebobTheGreat (author)2008-02-20

Looks really cool. +1, seriously

GorillazMiko (author)2008-02-20

You should really add in better pictures. They're really blurry. Still, you did a good job. ;-)

About This Instructable




Bio: I build Knex stuff. Prefferably the ones that explode. :D
More by Ltcheesecracker:Pretty Origami Paper BallSr-v1 desk topperknex bow and arrow
Add instructable to: