Introduction: Knex Buggy Independent Suspension and Steering
Knex buggy with independent (4) suspension and front wheel steering.
Try to build the same parts you see in the pics.
Step 1: Parts List
approximative
Step 2: Main Chassis
build this. there are 2 big parts, and 2 small parts.
Step 3: Steering System (SS)
build all these.
Step 4: Supports of SS
assemble the parts you have and it must look like this
Step 5: Top Cover
put the second big part on the others and connect them.
Step 6: Some Things
add the blue and purple connectors in front of the car as you see here
Step 7: Front Steering
build exactly TWO (2) of these, symmetrical. it is step by step and if followed, it should get right
Step 8: Front Suspension
try to get it similar
Step 9: Big N Tricky,rear of the Car
there are two that means you must have to parts exactly the same but symmetrical.
Step 10: Rear Suspension
with or without rubber bands!!
Step 11: Spoiler,wing Thing
Step 12: Last Things
front wheels,remove from each side a white rod and put a blue rod