Introduction: Knex Disc Launcher

semi automatic it holds 4 discs and shoots when you pull the trigger=)

im really sorry its not finished i just wanted it published it will be finished soon

Step 1: Frame

build the frame

Step 2: Trigger

pay attention this is rather tricky you will need to de-assemble the frame

Comments

author
fishbob1234 (author)2012-07-23

how can i pay atention if theres nothing to follow.

author
Metalbox (author)2011-09-04

3 years later...

author
inergy (author)2010-11-23

Wow bro, if you aren't gonna finish it, don't post it.

author
poop911 (author)2010-04-03

 finish it dude

author
355374 (author)2010-01-05

No offence, but its 2010 and this still isnt finished!!

author
darth_tater 2k8 (author)2008-09-03

This was posted ages back and you said you would finish it. IT HAS STILL NOT BEEN FINISHED EVEN THOUGH IT WAS POSTED MORE THAN 1 AND A HALF YEARS BACK! WHEN ARE YOU GOING TO FINISH IT?

author
bunduk (author)darth_tater 2k82008-09-19

like tomurrow

author
knex man123456 (author)bunduk2009-09-30

its 2009 and its not finished

author
Nazgul (author)bunduk2008-12-21

omg dude post it plesae..

author
crazykilla (author)Nazgul2009-02-03

https://www.instructables.com/id/bunduk_disc_launcher/do worry i already posted it click on this link hope the instructions r clear for u i also added a few mods to it though

author
118118 (author)darth_tater 2k82009-01-16

i no him, i want it 2, ill b as annoying with it at school as he is when he says hey butthead!

author
halo99 (author)2008-10-15

nice gun man... i made it copying the pics i mod it a little now it shoots 2 miles away!! i made this as a flare because me and my friends are having a knex war! if you want instructions on how to make it i just ask me!!!

author
Nazgul (author)2008-07-27

poost!

author
Whaleman (author)2007-11-05

Mind finishing this instructable?

author
bunduk (author)Whaleman2007-11-08

to be honest its not that good but if i have time i will post my new shotgun

author
Whaleman (author)bunduk2007-11-08

new ? or the old one.

author
bunduk (author)Whaleman2007-11-11

new

author
Whaleman (author)bunduk2007-11-11

good.

author
ds,ir; (author)2007-10-09

i cant follo the directions! add more steps man! but nice photo's anyways.

author
Bright Shadow (author)2007-09-23

OK, you posted this in April, right? And it's now.... September. Anything wrong with that scenario??!?!

author
skaterwhoowns (author)2007-09-12

Damn i ran out of knex for the clay pidgeon thrower

author
Vynash (author)2007-08-23

huuury i want it so bad

author
firewire (author)2007-06-29

im working on a sniper

author
bunduk (author)firewire2007-07-06

sweet

author
quincy85wrestler (author)2007-05-28

I tryed making a disc launcher that threw them like a clay pigeon thrower. It was awesome, you swung the arm around and it'd lock into place and then I had army turret style triggerthat would release the arm. the only problem was that it didn't throw very well and it was really wobbily, and i couldn't make it stronger because the arn was so gargancuan. oh well. maybe someone else could try to build one. by the way this thing's pretty cool; those discs, if thrown properly like this, hurt really bad. (wow that was long!)

author

ill try to make one and send you the instructions. it might take a couple of months but ill try to start on july 1st.

author
Mad Cat (author)2007-06-04

Erm... This is never going to be finished, is it?

author
Whaleman (author)Mad Cat2007-06-13

I dont know, i just checked back thinkin that it should be done now, a couple of months after the origional publishin, but it isnt.

author
baney (author)2007-06-02

good god! ive been gone for 10 days and this instructable is still not finished!!!

author
shadowstorm (author)2007-05-31

yes but, Shadow64 thought up of this deisign first so isnt i his design?

author
baney (author)2007-05-21

I found it good for a back scracher, thats about it... dont post a instructable if it's not finished.

author
quincy85wrestler (author)baney2007-05-28

he's basically just putting the idea out there so no one else can take his design. it's not uncommon to do this.

author
fobblewabble (author)2007-04-27

I made it and it shoots a good 100ft with a couple thick rubber bands. thanks bunduck

author
bunduk (author)fobblewabble2007-04-28

cheers

author
knex boy (author)bunduk2007-05-21

hi can u finish dis and put the link on the comment plz the gun that u brought into school(the tiny 1)

author
KnexSniper (author)2007-05-09

it is pretty good

author
Knex Rules (author)2007-05-03

Hurry up and post it!

author
Mad Cat (author)2007-04-26

So, how exactly does it work? Does it have a hopper?

author
smidge147 (author)Mad Cat2007-04-27

no u put wheels on the stick out bit and attach rubber bands to it then wen u pull the trigger the stick out bit goes down and the wheels shoot very easy design

author
Mad Cat (author)smidge1472007-04-27

Ok, I get it now. So the disks are pretty much preloaded.

author
Mad Cat (author)2007-04-24

Some people may think this is a copy, but pictures of this were up WAY before the other one. And plus, this is probably better.

author
Whaleman (author)2007-04-24

it is like the other one, but it looks a little better

author
iKill (author)2007-04-24

this is like an exact copy of that other one

author
Kaiven (author)2007-04-24

looks cool, but i agrree with everyone else

author
bunduk (author)2007-04-24

as i said im sorry its not complete

author

how does it work? does it flick the discs?

author

Whats the point in posting if its not done, no one can build it. I do look forward to the finished design.

About This Instructable

7,716views

8favorites

License:

Bio: I shoot stuff, make funny videos , mess around with mt bro play my ds and other cool stuff boys find fun
More by bunduk:knex disc launcherSemi-auto rbg pistolknex shotgun
Add instructable to: