Picture of knex forklift (instructions)
hi guys this is the instructions for my knex forklift hope you like it and please comment.also some credit to imperer for the steering he made for front wheels.i changed it quite abit to make it for wheel steering but his steering did help me a little so thanks to him.
Remove these adsRemove these ads by Signing Up

Step 1: Front axle and steering mech

Step 2: Back axle,steering and bits and bobs

Step 3: Other stuff and front bit

Step 4: Steering wheel and attatching the front

Step 5: Back,top and inside

Step 6: The fork lift thing

millju (author) 2 years ago
also connect the grey 1 way connecter to the blue rod that is attatched to the bottom left orange two way connecter (for last picture of step 5)