Knex Gun Handle

990

1

19

Posted

Introduction: Knex Gun Handle

A simple yet efective and comfy gun handle. it only uses 13 pieces
By the way it is my first instructable.

Step 1: Step 1

For this you will need:
2 yellow rods
11 green connectors

And to build just follow the pictures its simple and it
follows a pattern.

Step 2: Step 2

The first green connector has 2 yellow rods connected but the second has one connected

Step 3: Step 3

the 3rd green connector is only connected to one yellow rod

Step 4: Step 4

the fourth connector is connected to both yellow rods like the first connector

Step 5: Step5

Add 5th connector on to a single yellow rod

Step 6: Step 6

Add 6th connector on to a yellow rod as shown in picture

Step 7: Step 7

Add 7th connector to both rods as shown in picture

Step 8: Step 8

Add connector to a rod shown in pic

Step 9: Step 9

Add conector on to rod as shown in pic

Step 10: Step 10

Add connector on to both rods

Step 11: Step 11

Add final piece on to one yellow rod

Step 12: Step 12

the finished product

TA DA

Share

Recommendations

  • Sew Warm Contest 2018

    Sew Warm Contest 2018
  • First Time Author Contest 2018

    First Time Author Contest 2018
  • Gluten Free Challenge

    Gluten Free Challenge
user

We have a be nice policy.
Please be positive and constructive.

Tips

Questions

20 Comments

Very, VERY simple. I could make this from memory by looking at it for about 2 seconds. so i dont need 12 steps all with descriptions. Ok? The handle itself is not bad, though....

Besides the fact that it has been done before, or is similar to the other... do people honestly need 12 steps to make this?

this has allready been posted delete it please trust me dude people ar ganna hate this and for me it kinda sucks so just delete it

this has not been done...dont be harsh