Introduction: Knex Gun With New Trigger & Sear System
Assault rifle
Connectors:
31 red/dark grey
22 green
14 white/black
10 purple/silver
4 orange/brown
1 tan/dark tan clip
51 yellow/ light grey
16 grey clip
11 special black arm things
2 blue
12 blue spacers
Rods:
2 black (rigid)
5 grey (flexible)
22 blue
20 white/silver
10 yellow/dark grey
4 red/tan
33 green/black pegs
Step 1: Firing Pin
self explanatory 3 dark grey connectors, 1 rigid black piece and a tan clip
Step 2: Back of Gun
some of the pics a re a little bright sorry about that
Step 3: Handle
enter longer description for this step
Step 4: Trigger
enter longer description for this step
Step 5: Scope & Trigger Slide
enter longer description for this step
Step 6: Barrel
enter longer description for this step
Step 7: Body & Body/ Back of Gun Connector
make 2 of these and you will also need 2 blue rods to connect them
Step 8: Front Handle Grip
Step 9: Putting It All Together
pic 1 attach body/back of gun connector to the body
pic 2 attach sear to the body
pic 3 attach back of gun to body/back of gun connector
pic 4 attach firing pin slide to body and back of gun and insert the firing pin
pic 5 insert trigger
pic 6 attach handle to body
pic 7 attach front handle grip to the barrel
pic 8 attach the front handle grip and barrel to the body
pic 9 attach scope to barrel
Step 10: Attaching Rubberbands
pic 1 wrap rubberband around front of scope
pic 2 wrap the same rubberband from pic 1 to the firing pin
pic 3 wrap another rubberband on the sear as shown
pic 4 wrap the same rubberband from pic 3 as shown
Step 11: This the Sear Sorry About That
enter longer description for this step